Provide two sets of data cables, both including RJ45, RS485, and power input/output.
The power input/output interface is internally conductive, with one channel available for input and the other for output..
There is a switch inside the device, so any network can be used to connect to camera or LAN.
Interface definition
| Connecter No. | Connection | Description |
| 1 | Power In/out | DC12V |
| 2 | Ethernet | 100 based ETH |
| 3 | RS485 | Can connect to Pan Tilt or MODBUS device |
Ethernet connector
We provide waterproof kits, connect the network cable as shown in the figure.
Power In/Out Connector
The specification of the power connector is 5525, and the connection method is shown in the following figure.
RS485 Connector
If there is a gimbal that needs to be controlled, it can be connected to the RS485 interface.
| Label | Define | Description |
| + | RS485 A | 9600 bps baud rate |
| - | RS485 B |